Another very minor update.
after the brake light issue I decided not needed to get access to both light clusters. Unfortunately the near side cluster was blocked by the rear rock and roll trim. Fair enough, will take the trim off, move it 6 inches across. 6 inches of movement meant the frame of the bed was blocking the access panel so I could only move it 4 inches, the remaining 2 inches had to be cut off the end of the panel.
Turns out there was also no hole cut in the carpet to allow access to the cluster. Stanley knife and a pair of small scissors did the job with minor fuss. It’s not perfect but it’s now functional.
C84FBE5C-0592-4C95-8350-D53FCDADC1EF.jpeg
while I had the clusters open I fitted some new led reverse lamps which should make it a lot easier to judge where the back of the van is when reversing at night!
617ABEBA-E555-4940-A0DA-F483357889D4.jpeg
after the brake light issue I decided not needed to get access to both light clusters. Unfortunately the near side cluster was blocked by the rear rock and roll trim. Fair enough, will take the trim off, move it 6 inches across. 6 inches of movement meant the frame of the bed was blocking the access panel so I could only move it 4 inches, the remaining 2 inches had to be cut off the end of the panel.
Turns out there was also no hole cut in the carpet to allow access to the cluster. Stanley knife and a pair of small scissors did the job with minor fuss. It’s not perfect but it’s now functional.
C84FBE5C-0592-4C95-8350-D53FCDADC1EF.jpeg
while I had the clusters open I fitted some new led reverse lamps which should make it a lot easier to judge where the back of the van is when reversing at night!
617ABEBA-E555-4940-A0DA-F483357889D4.jpeg
Comment