Hi folks knowledge base central needed once again.., major head scratching foot pumping pressure bleeding all because I changed the wiper linkage.
So I had to remove the brake cylinder from servo to allow me room to change the wiper linkage pita. Now I have perfect wiper action, but no brakes. I've bled the fluid through completely nice new clear fluid from all calipers with the gunson ezbleed,bled the cylinder all 3 pipes can't get at the 4th as the IC in the way. Still the brake pedal stiffens when engine off then when I start it up the pedal goes to the floor, I've tried several times, so you think the master cylinder is done, doesn't look that odd to be honest.
Cheers
So I had to remove the brake cylinder from servo to allow me room to change the wiper linkage pita. Now I have perfect wiper action, but no brakes. I've bled the fluid through completely nice new clear fluid from all calipers with the gunson ezbleed,bled the cylinder all 3 pipes can't get at the 4th as the IC in the way. Still the brake pedal stiffens when engine off then when I start it up the pedal goes to the floor, I've tried several times, so you think the master cylinder is done, doesn't look that odd to be honest.
Cheers
Comment