If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Opened the 240mm AXG/ AHY DMF clutch and a T4 228mm SMF internal 8 hole PCD is identical. Pics show SMF on DMF, 228mm friction plate on 240mm DMF & then the 228mm clutch plate on 240mm DMF. Locating pins line up but for a v small fraction of a mm, although outer bolt holes look spot on.
Tried a non T4 6 hole ZRE 228mm clutch plate on the DMF out of curiosity but it's no where near.
Flywheels overlaid
AXG/AHY VW pn# 074 105 266L
Volvo (on flywheel from a pic) pn#074 105 266B
Also got on with an old project, some new mounts fabricated, bonded in place and the the whole lot filled in with expanding foam, except the can was spluttering out gobs of foam randomly
Never mind a quick trim with a knife and all was good
Comment