Having spent last night making and painting a bracket for the nearside seatbelt mount I went outside tonight to get it fitted. After a bit of a fiddle getting the wire down the pillar it transpires that there is a reinforcing panel right near the top of the pillar inbetween the two holes I drilled to take the bolts.
I've cut the new bracket in half and managed to fit the lower half by pulling it up through the pillar, the top hole presented more problems, I cut a slot in the pillar, fitted the bracket and then welded up the slot, what a pain in the arse. it is in now.
I've cut the new bracket in half and managed to fit the lower half by pulling it up through the pillar, the top hole presented more problems, I cut a slot in the pillar, fitted the bracket and then welded up the slot, what a pain in the arse. it is in now.
Comment