Announcement
Collapse
No announcement yet.
My second T4, operation de-chav
Collapse
X
-
Originally posted by regcheeseman View Postnot sure at this point how much use 180 spun seats would be? Still good to have the option.
Comment
-
Originally posted by Activ8 View PostOption B would be better imo.
If the width of the double rails matched the single (plus another buckle) you could move the single to the nearside.
If the double could share the rh single rail or have its own additional (add-on) to give three floor fixings.
Plus if the rails were equidistant you could also spin them all 180° to face the rear?
It seems spreader plates are redundant, koller just use 30mm washers at the prescribed 100mm between centres mounting points on the rail to satisfy M1 and M2.
edit - wrote this Friday, come into work this morning and it is still sat here waiting to post
Comment
-
Originally posted by Activ8 View PostI was thinking that you'll fit that tailgate soon and you alway see owners sitting in rear of their vans staring out to sea under the shadow of the tailgate, beer in hand just chilling. Those R&R beds were always to short in the base/leg for me & too upright to sit comfortably...... but with RR seats .... what a great way to relax.
Comment
-
Originally posted by regcheeseman View PostThey are equidistant - but I may not be able to fit a centre rail perfectly central, depending how uniform the ribbing is on the van floor - ideally I want to fit to the peaks in the ribbed floor.
It seems spreader plates are redundant, koller just use 30mm washers at the prescribed 100mm between centres mounting points on the rail to satisfy M1 and M2.
edit - wrote this Friday, come into work this morning and it is still sat here waiting to post
Comment
-
Originally posted by Activ8 View PostHow thick?
Koller M8 Rail Fixing Set - recommended when fitting M8 Low Profile, Surface and T Bolt rails.
The Koller M8 Rail Fixing Set Advantage:
Recommended to meet M1 load floor installations
Also suitable for M2 load floor installations
Zinc plated for corrosion prevention, each set comprises :
M8 Couuntersunk socket head screw, M8 x 45mm long
M8 Nyloc Nut
M8 x 30mm diameter washerLast edited by regcheeseman; 30 September 2019, 01:27 PM.
Comment
-
Originally posted by regcheeseman View Posterm 30mm?
Koller M8 Rail Fixing Set - recommended when fitting M8 Low Profile, Surface and T Bolt rails.
The Koller M8 Rail Fixing Set Advantage:
Recommended to meet M1 load floor installations
Also suitable for M2 load floor installations
Zinc plated for corrosion prevention, each set comprises :
M8 Couuntersunk socket head screw, M8 x 45mm long
M8 Nyloc Nut
M8 x 30mm diameter washer
What's the difference between M1 & M2 approval? Do you get a TUV type approval certificate from Koller?
Comment
-
Comment
Comment