How much per bolt? I've got three vans to upgrade...
Announcement
Collapse
No announcement yet.
My second T4, operation de-chav
Collapse
X
-
Less than £2 I expect. Need to measure the pitch up properly. I already have washers from the crank girdle group buy I arranged and had to buy 1000 washers.
Has someone already had a go at removing the output shaft from the gearbox you sent me? The shaft seal had been popped out of location and then not really refitted.
Had the box sat roughly in place on the block earlier, just to check the fit. It should go but it does sit the selector at a strange angle.Last edited by regcheeseman; 6 November 2018, 10:19 PM.
Comment
-
Originally posted by regcheeseman View PostLess than £2 I expect. Need to measure the pitch up properly. I already have washers from the crank girdle group buy I arranged and had to buy 1000 washers.
Has someone already had a go at removing the output shaft from the gearbox you sent me? The shaft seal had been popped out of location and then not really refitted.
Went to look at it before I bid. Not touched by me as I had it sent direct to you so cannot comment. Thought you were going 02M route?
Comment
-
Originally posted by Activ8 View PostHow much for 12 washers but needed for Friday morning? Saves me cutting the old bolts up and opening them up to fit!
Went to look at it before I bid. Not touched by me as I had it sent direct to you so cannot comment. Thought you were going 02M route?
02M/O2J makes no difference to the adaptor plate so either will work as far as I can see, 02M gives an easy syncro option, but as I bought the driveshaft conversion for the GRF I may as well continue on that route with the 02J
Odd that seal was displaced - no issue apart from it dumping stinky gearbox oil in the garage
Originally posted by Activ8 View PostFrom which donor?
Comment
-
Sorry - not seen these posts.
Did you need the measurements still?
Feeling guilty that I've been neglecting the van recently and it is showing. Started blowing more black smoke than I've previously noticed, not sure if has become a bit noisier recently was noticing a nice deep roaring induction or possibly exhaust noise last night.
Need to give it a check over and maybe a bit of TLC.
Comment
-
Originally posted by regcheeseman View PostSorry - not seen these posts.
Did you need the measurements still?
Feeling guilty that I've been neglecting the van recently and it is showing. Started blowing more black smoke than I've previously noticed, not sure if has become a bit noisier recently was noticing a nice deep roaring induction or possibly exhaust noise last night.
Need to give it a check over and maybe a bit of TLC.
All and any info on the OEM 220mm DMF welcomed. Cheers.
Comment
-
Some virtual progress on the van, Libre CAD kept crashing on me, FreeCAD was too confusing, I have found Fusion 360 and it is very easy to use.
Turbo flange
Exhaust manifold
There's a custom manifold for a bigger GT2256 turbo in the pipeline.
Gearbox adaptor plate - this baby has been a LONG time in gestation, but now things are happening at a pace.
For fitting a six speed box, allowing a bigger clutch and crucially better ratios all through the box rather than patching it with a fifth gear mod - watch this space.
Comment
Comment