Originally posted by arfur fox-acre
View Post
Announcement
Collapse
No announcement yet.
T4 with a T4 plate
Collapse
X
-
Originally posted by regcheeseman View PostIs your grinder broke, you appear to have left the half bulkhead in by accident.
Shropshireeeeeee
Comment
-
Originally posted by tenburner View PostBasically because I want to have as much width and length as possible with a side pull bed there will be units up against the bulkhead. I don’t intend to be sitting in the van too much hence no swivel seats
Shropshireeeeeee
Comment
-
Another big night on the van. Passenger side insulated. Rear quarter ply back on. One wheel arche insulated. First part of the roof insulated and put back on but I’m waiting for the roof lights to arrive before I put it back in. Pulled the plywood off the sliding door upper in preparation for getting a window fitted - had to get a bit drastic with some sealant from the previous owner so used the wire brush to get it off and then painted over it with more hammerite. Split charge kit arrives tomorrow.
messy van!
Comment
-
Bit of progress this weekend. All insulation complete bar the passenger barn door as I need to cut a new bit of ply for it. Also roof lights installed. They are bright as fook! Was such a ballache to get the roof panels back on though. Running off the main battery to test them but obviously need to install the leisure setup. Flooring next probably!
Shropshireeeeeee
Comment
-
T4 with a T4 plate
Drivers side ply back on tonight, as well as fuse box and also a USB socket near the back of the van. Will see how much it gets used but I thought if I am ever sat out the back of the van it would be useful to have the usb socket nearby.
Shropshireeeeeee
- 1 like
Comment
-
After fitting the side window today this evening I started plumbing in the switch panel with the voltmeter - I’m not an expert on electronics by any means, so could anyone tell me if it matters for the accuracy of the voltmeter reading if it isn’t earthed directly onto the negative terminal of the battery?
Also, pic for the sake of it but we all know what one of these switch panel looks like I’m sure
Shropshireeeeeee
Comment
Comment