Announcement
Collapse
No announcement yet.
Buddy the bus build
Collapse
X
-
HELP HELP! I got the engine in the van last weekend and got everything plumed up went to bleed the the injectors and it didn't come up to the injecto unions. Instead it leaked from the spindle where it operates the throttle. [emoji58][emoji58][emoji58][emoji58] dunno where to go from here.
Sent from my SM-J530F using Just T4s
Comment
-
It was dripping while running. But if you have a leak there and trying to bleed it'll come out of the first /easiest port of call in the line so you need to cure to get running. I did a little how to in my build thread and there's a picture of the seal/bush kit I used.
Comment
-
Originally posted by S49 View PostPage 43 to 47 Then speak to Reg
Sent from my SM-J530F using Just T4s
Comment
-
Originally posted by S49 View PostIt was dripping while running. But if you have a leak there and trying to bleed it'll come out of the first /easiest port of call in the line so you need to cure to get running. I did a little how to in my build thread and there's a picture of the seal/bush kit I used.
Sent from my SM-J530F using Just T4s
Comment
-
Originally posted by bradleigh2 View PostI just had a gander looks like a time consuming and fiddly job but will might have to be done b4 anything. I still have the injectors in the head for electronic pump but my all ones won't fit I reckon. Kinda wished I did I fuel Tdi conversion now.
Sent from my SM-J530F using Just T4s
Comment
Comment