Announcement
Collapse
No announcement yet.
T4 : Battle Across Time (2010 to present)
Collapse
X
-
Originally posted by Activ8 View PostThe first interior was originally supplied by Darren Archer Interiors (looking for a picture!), a driver seat and double then I had the door cards, an AA rear double and a single passenger seat made by Ade @ Superstitch.
It was all done in very expensive Italian leather (the workmanship was fantastic) , but the girlfriend chose it - I hated it.... on the day I collected it I ordered something different and a week later binned the girlfriend.
Sent from my SM-G901F using Just T4s
Sent from my iPhone using Just T4sSlowly slowly catchy monkey!
Comment
-
-
-
Here's some more for the sticker album Reg... 2018... checked and reset the timing this afternoon and being in service mode thought I'd tackle a couple of oustanding jobs.
Old look front
NEW look front
Fitted the newly painted front panel but sorted a few bits out on the way...
I'm experimenting with the inlet air temp at the moment and want to.make some modifications but not at the expense of a front panel so stage one is to use what's already there...
I'm wasnt comfortable exposing the electrics for the A/C so temporarily fitted a single headlight washer to the nearside.
Omitting the offside washer jet allows air to pass through into the engine bay. If the temp reductions are positive it's my intention to open the offside to 76mm with a direct cold air feed system. It's also where I'd like to site turbo no.2 at some future point.
Received this washer bottle kit last week - it's tiny compared to the OEM unit but ideal for relocating behind the air filter.
Unfortunately the bottle will not take the OEM washer motor/pump so made a loom up and it's good to go. Might need a better fixing for the bottle but a drive tomorrow will let me know. As it's so small I disconnected the rear feed and may now bin the rear barn door wipers.
One for Reg.... little red filter is the top of my catch can. When the IC is next off I'll take a better picture.
Sent from my SM-G901F using Just T4sLast edited by Activ8; 23 June 2018, 12:47 AM.
Comment
-
Originally posted by regcheeseman View PostWhat size is the intercooler pipework - tempted to upgrade mine from 2" to 2.25 or 2.5 if it'll fit
Is that small postage stamp hole in the front panel supposed to supply cold air feed?
First stage postage stamp (it's 50mm x 50mm) then through 50mm diameter with no pipework just to see how the temps fair. Plan is to open it up to 76mm piped into an open larger Volvo airbox.
Sent from my SM-G901F using Just T4s
Comment
-
Originally posted by regcheeseman View PostWhy is the catch can al the way over there??
Sent from my SM-G901F using Just T4s
Comment
Comment