I don’t use a wax , what would you recommend ?
Announcement
Collapse
No announcement yet.
Shed Seven
Collapse
X
-
I’ve made an access panel for the R’n’R bed as I’m going to use the underneath as storage .
The panel is hinged for me to gain access.
Hinges are pop riveted to the frame of the bed and screwed to the panel , then I’ve used magnets to fasten the panel in place , it works well and I think the magnets will be strong enough , the magnets I’ve used are the type that are fitted to cupboard doors around the home , I’m sure we’ve all come across them .
I’m going to make a panel for the front of the R’n’R , but I’m still thinking about how I’m going to do it as , I have to be able to unclip the seat mechanism to pull the R’n’R out to the bed configuration, I have a plan .........
Sent from my iPad using Just T4s
Comment
-
Finally my kitchen pod is fitted , it’s been a job that has dragged its heels for a long time now .
All I need to do is connect up the gas pipe and fit the gas bottle , hopefully I’ll have that sorted before we go camping .
I’ll let the pics do the talking .
Plumping .
Waste water on the left and clean water on the right , I will find a black waste water container at some point in the future .
We have running water , via a 12v pump and micro switch fitted in the tap .
Single gas burner , can’t wait to make a cup of tea when we’re out and about .
Kitchen pod fitted .
Storage space in the cupboard .
240v / 12v fridge will be located behind the drivers seat .
Lots of hassle and problems with fitting / wiring and plumbing the kitchen pod , but I’m happy , a few minor teething problems to iron out but that’s ok.
Next couple of jobs will be fit the fridge , Tv and sort out a table , I’m thinking of fitting a wake board table , not sure yet .
Sent from my iPad using Just T4sLast edited by Fruitbat; 24 March 2019, 09:02 PM.
Comment
-
Originally posted by S49 View PostLove getting the kettle on in the van. Did me curry pot noodle on ours up the dams today.
Originally posted by Activ8 View PostNice looking pod Kev. One pot cooking - always a winner in my book. What sort of fixing did you opt for in the end? Can't see any bungees???? [emoji6]
Originally posted by Eagles02 View PostLooking nice that mate.
Thankyou mate
Comment
-
Tonight I fitted my table .
I bought the table and sequoia leg system from Clearcut conversions , the leg is expensive but a well made bit of kit .
I just need to come up with a space saving solution for the table and leg , I’ve a few ideas
Sent from my iPad using Just T4sLast edited by Fruitbat; 2 April 2019, 10:16 PM.
Comment
Comment