If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Thanks for all your kind comments, they mean a lot.
I did a little more this morning, wanted to finish that section before I started the last panel. Just a little tidy up of overspray, touching up the black where the sun has mullered it over the last two years.
I also gave him some shading and a gold toooof.
Sorry the picture is bad but the sun kept reflecting off it...which I suppose means it's working at least.
Thanks for all your kind comments, they mean a lot.
I did a little more this morning, wanted to finish that section before I started the last panel. Just a little tidy up of overspray, touching up the black where the sun has mullered it over the last two years.
I also gave him some shading and a gold toooof.
Sorry the picture is bad but the sun kept reflecting off it...which I suppose means it's working at least.
[ATTACH=CONFIG]11066[/ATTACH]
[ATTACH=CONFIG]11067[/ATTACH]
Brilliant, what a cracking idea and practical too ! [emoji122][emoji122][emoji122]
Thanks. I even put a hologram on it like vw do on there stuff.
[ATTACH=CONFIG]11069[/ATTACH]
It simply stunning Arf and great artistry, theres got to be a market for roof decals if this is anything to go by.... I love this site for the ideas & creativity! Cheers Arf [emoji106]
A few jobs today, nothing exciting.
I've re jigged the sub so I can adjust the gain without removing the seat. Which involved removing the seat, at least now I can set the level as even with it set in lowest at the headunit it still sounded like a 90s Nova.
I spent some time removing the 1/4 tonne of cement from the left side door channel and decided today was the day to repair the door seal that has been destroyed from the vans days as a work van.
Seen better days. However, these seals are expensive and I'm a tight Lancashire lad so I saved a seal from an aluminium patio door I removed as it has a similar profile.
I also refiited the side bars. Let's keep that between you and me though. Going to have to design a quick release system as the have to come off every six months now. Let's see.
Comment