Page 3 of 7 FirstFirst 12345 ... LastLast
Results 21 to 30 of 68
  1. #21
    Activ8's Avatar Moderator
    Join Date
    Oct 2017
    Location
    Derbyshire
    Posts
    10,508
    Thanks
    4,006
    Thanked 3,418 Times in 2,698 Posts

    Quote Originally Posted by qtronix View Post
    forgot to mention about the gt35 it just sounds better when you say supercharged.
    Not to me.... they're energy sapping with limitations on a diesel. Thats a big SC for a litte 'ol 1.9! I did some calcs on running a supercharger/turbo combo on the 2.5tdi. Dumping the vans aircon compressor to replace it with a supercharger feeding a GT28 or similar and I couldn't get the numbers to stack up compared to a single turbo config.

    What did work well (in theory) was the way it could all sit in the engine bay with the ICs.
    Last edited by Activ8; 28th June 2019 at 05:17 PM.

  2. #22
    qtronix's Avatar Now you're learning (Copper)
    Join Date
    May 2019
    Posts
    67
    Thanks
    8
    Thanked 66 Times in 38 Posts
    preping the van to paint it. noticed cracking in the paint on the sliding door, this is what i found after using the angle grinder to take some of it off. this door was straight but with cracks before this.

    Click image for larger version. 

Name:	van resize.jpg 
Views:	99 
Size:	101.2 KB 
ID:	12923

  3. #23
    damont4's Avatar Privileged
    Join Date
    Feb 2019
    Location
    Wincanton somerset
    Posts
    881
    Thanks
    1,179
    Thanked 483 Times in 341 Posts
    Holy shit mate is that a shed load of filler
    Quote Originally Posted by qtronix View Post
    preping the van to paint it. noticed cracking in the paint on the sliding door, this is what i found after using the angle grinder to take some of it off. this door was straight but with cracks before this.

    Click image for larger version. 

Name:	van resize.jpg 
Views:	99 
Size:	101.2 KB 
ID:	12923
    Sent from my JSN-L21 using Just T4s

  4. #24
    S49's Avatar Privileged
    Join Date
    Jun 2017
    Location
    worcestershire
    Posts
    12,459
    Thanks
    2,815
    Thanked 4,530 Times in 3,487 Posts
    Looks full of isopon to me.

  5. #25
    qtronix's Avatar Now you're learning (Copper)
    Join Date
    May 2019
    Posts
    67
    Thanks
    8
    Thanked 66 Times in 38 Posts
    yeah must of been an inch thick in some places, thats still not all off.

  6. The Following User Says Thank You to qtronix For This Useful Post:

    AndyLeach (4th July 2019)

  7. #26
    qtronix's Avatar Now you're learning (Copper)
    Join Date
    May 2019
    Posts
    67
    Thanks
    8
    Thanked 66 Times in 38 Posts
    started cutting the hole in the van for the side exit exhaust and fml. must be 8mm filler on this panel aswell.

    Click image for larger version. 

Name:	resize exhaust hole.jpg 
Views:	76 
Size:	10.4 KB 
ID:	12931

  8. The Following 2 Users Say Thank You to qtronix For This Useful Post:

    AndyLeach (4th July 2019),damont4 (4th July 2019)

  9. #27
    AndyLeach's Avatar Unemployed (Platinum)
    Join Date
    Sep 2018
    Location
    Swansea
    Posts
    1,747
    Thanks
    3,889
    Thanked 746 Times in 535 Posts
    Quote Originally Posted by qtronix View Post
    started cutting the hole in the van for the side exit exhaust and fml. must be 8mm filler on this panel aswell.

    Click image for larger version. 

Name:	resize exhaust hole.jpg 
Views:	76 
Size:	10.4 KB 
ID:	12931
    But once you have it done itís gonna be All Thriller No Filler Iím Sure 🤙🏽🤙🏽🤙🏽


    T4ism is not a Dis-easeJust T4s

  10. The Following User Says Thank You to AndyLeach For This Useful Post:

    Fruitbat (4th July 2019)

  11. #28
    qtronix's Avatar Now you're learning (Copper)
    Join Date
    May 2019
    Posts
    67
    Thanks
    8
    Thanked 66 Times in 38 Posts
    so i got most of the engine back together now, i had to rebuild the fuel pump into my old housing, so put it all back on the van and would not start.
    thought it was me building the pump back up so i stripped it all back down but it was all good.
    gave it a bit of wd40 to get it firing and then it started up but i had to stop it straight away as this happened.
    it sucked up a load of shit from the fuel filter or bad pipes. tank is clean i checked it
    gonna order new fuel lines and a remote filter housing with spin on filters.

    Click image for larger version. 

Name:	IMG_20190715_152707.jpg 
Views:	67 
Size:	72.8 KB 
ID:	13061

    Click image for larger version. 

Name:	IMG_20190715_152715.jpg 
Views:	65 
Size:	50.6 KB 
ID:	13062

  12. The Following 2 Users Say Thank You to qtronix For This Useful Post:

    AndyLeach (15th July 2019),Fruitbat (15th July 2019)

  13. #29
    AndyLeach's Avatar Unemployed (Platinum)
    Join Date
    Sep 2018
    Location
    Swansea
    Posts
    1,747
    Thanks
    3,889
    Thanked 746 Times in 535 Posts
    Quote Originally Posted by qtronix View Post
    so i got most of the engine back together now, i had to rebuild the fuel pump into my old housing, so put it all back on the van and would not start.
    thought it was me building the pump back up so i stripped it all back down but it was all good.
    gave it a bit of wd40 to get it firing and then it started up but i had to stop it straight away as this happened.
    it sucked up a load of shit from the fuel filter or bad pipes. tank is clean i checked it
    gonna order new fuel lines and a remote filter housing with spin on filters.

    Click image for larger version. 

Name:	IMG_20190715_152707.jpg 
Views:	67 
Size:	72.8 KB 
ID:	13061

    Click image for larger version. 

Name:	IMG_20190715_152715.jpg 
Views:	65 
Size:	50.6 KB 
ID:	13062
    I love your Efforts and Enthusiasm 🤙🏽🤙🏽


    T4ism is not a Dis-easeJust T4s

  14. The Following User Says Thank You to AndyLeach For This Useful Post:

    qtronix (16th July 2019)

  15. #30
    qtronix's Avatar Now you're learning (Copper)
    Join Date
    May 2019
    Posts
    67
    Thanks
    8
    Thanked 66 Times in 38 Posts
    moved the bumper back about an inch and a half. not fitting the side mounts onto it yet. still need to line it all up.
    i had to cut down the panel support and cut the bumper to fit.


    Click image for larger version. 

Name:	bumper1.jpg 
Views:	52 
Size:	20.2 KB 
ID:	13074

  16. The Following User Says Thank You to qtronix For This Useful Post:

    Activ8 (17th July 2019)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •