Page 1 of 4 123 ... LastLast
Results 1 to 10 of 40
  1. #1
    Drew's Avatar Now you're learning (Copper)
    Join Date
    Jun 2017
    Posts
    81
    Thanks
    35
    Thanked 12 Times in 10 Posts

    Rear speaker pods

    AS my van interior is forever coming in and out I decided to have a go at mounting my speakers up high in the rear corners. I looked online and didn't like the options so thought I'd have a go at making some.......

    Sent from my SM-G950F using Just T4s

  2. #2
    Drew's Avatar Now you're learning (Copper)
    Join Date
    Jun 2017
    Posts
    81
    Thanks
    35
    Thanked 12 Times in 10 Posts
    So masked off the area. Then gorilla taped as I was worried about the epoxy soaking through.

    Sent from my SM-G950F using Just T4s

  3. #3
    Drew's Avatar Now you're learning (Copper)
    Join Date
    Jun 2017
    Posts
    81
    Thanks
    35
    Thanked 12 Times in 10 Posts
    And made these little bad boys....on to the rings

    Sent from my SM-G950F using Just T4s

  4. #4
    Drew's Avatar Now you're learning (Copper)
    Join Date
    Jun 2017
    Posts
    81
    Thanks
    35
    Thanked 12 Times in 10 Posts
    Got two cheap holesaw online cut out some rings glued and clamped them up

    Sent from my SM-G950F using Just T4s

  5. #5
    Drew's Avatar Now you're learning (Copper)
    Join Date
    Jun 2017
    Posts
    81
    Thanks
    35
    Thanked 12 Times in 10 Posts
    Epoxyed the rings to the fibreglass mounts....used two temporary screws to hold whilst drying

    Sent from my SM-G950F using Just T4s

  6. #6
    Drew's Avatar Now you're learning (Copper)
    Join Date
    Jun 2017
    Posts
    81
    Thanks
    35
    Thanked 12 Times in 10 Posts
    Quote Originally Posted by Drew View Post
    Epoxyed the rings to the fibreglass mounts....used two temporary screws to hold whilst drying

    Sent from my SM-G950F using Just T4s
    Also cut a little section out the back so the rings sit flat

    Sent from my SM-G950F using Just T4s

  7. #7
    Drew's Avatar Now you're learning (Copper)
    Join Date
    Jun 2017
    Posts
    81
    Thanks
    35
    Thanked 12 Times in 10 Posts
    Stretched some big mama tights over the top and epoxyed them up

    Sent from my SM-G950F using Just T4s

  8. #8
    Drew's Avatar Now you're learning (Copper)
    Join Date
    Jun 2017
    Posts
    81
    Thanks
    35
    Thanked 12 Times in 10 Posts
    One layer of fiberglass to toughen it up

    Sent from my SM-G950F using Just T4s

  9. #9
    Drew's Avatar Now you're learning (Copper)
    Join Date
    Jun 2017
    Posts
    81
    Thanks
    35
    Thanked 12 Times in 10 Posts
    Test fit.......

    Sent from my SM-G950F using Just T4s

  10. #10
    Drew's Avatar Now you're learning (Copper)
    Join Date
    Jun 2017
    Posts
    81
    Thanks
    35
    Thanked 12 Times in 10 Posts
    Felted them

    Sent from my SM-G950F using Just T4s

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •