Page 1 of 4 123 ... LastLast
Results 1 to 10 of 40
  1. #1
    Drew's Avatar Now you're learning (Copper)
    Join Date
    Jun 2017
    Posts
    77
    Thanks
    35
    Thanked 10 Times in 9 Posts

    Rear speaker pods

    AS my van interior is forever coming in and out I decided to have a go at mounting my speakers up high in the rear corners. I looked online and didn't like the options so thought I'd have a go at making some.......

    Sent from my SM-G950F using Just T4s

  2. #2
    Drew's Avatar Now you're learning (Copper)
    Join Date
    Jun 2017
    Posts
    77
    Thanks
    35
    Thanked 10 Times in 9 Posts
    So masked off the area. Then gorilla taped as I was worried about the epoxy soaking through.

    Sent from my SM-G950F using Just T4s

  3. #3
    Drew's Avatar Now you're learning (Copper)
    Join Date
    Jun 2017
    Posts
    77
    Thanks
    35
    Thanked 10 Times in 9 Posts
    And made these little bad boys....on to the rings

    Sent from my SM-G950F using Just T4s

  4. #4
    Drew's Avatar Now you're learning (Copper)
    Join Date
    Jun 2017
    Posts
    77
    Thanks
    35
    Thanked 10 Times in 9 Posts
    Got two cheap holesaw online cut out some rings glued and clamped them up

    Sent from my SM-G950F using Just T4s

  5. #5
    Drew's Avatar Now you're learning (Copper)
    Join Date
    Jun 2017
    Posts
    77
    Thanks
    35
    Thanked 10 Times in 9 Posts
    Epoxyed the rings to the fibreglass mounts....used two temporary screws to hold whilst drying

    Sent from my SM-G950F using Just T4s

  6. #6
    Drew's Avatar Now you're learning (Copper)
    Join Date
    Jun 2017
    Posts
    77
    Thanks
    35
    Thanked 10 Times in 9 Posts
    Quote Originally Posted by Drew View Post
    Epoxyed the rings to the fibreglass mounts....used two temporary screws to hold whilst drying

    Sent from my SM-G950F using Just T4s
    Also cut a little section out the back so the rings sit flat

    Sent from my SM-G950F using Just T4s

  7. #7
    Drew's Avatar Now you're learning (Copper)
    Join Date
    Jun 2017
    Posts
    77
    Thanks
    35
    Thanked 10 Times in 9 Posts
    Stretched some big mama tights over the top and epoxyed them up

    Sent from my SM-G950F using Just T4s

  8. #8
    Drew's Avatar Now you're learning (Copper)
    Join Date
    Jun 2017
    Posts
    77
    Thanks
    35
    Thanked 10 Times in 9 Posts
    One layer of fiberglass to toughen it up

    Sent from my SM-G950F using Just T4s

  9. #9
    Drew's Avatar Now you're learning (Copper)
    Join Date
    Jun 2017
    Posts
    77
    Thanks
    35
    Thanked 10 Times in 9 Posts
    Test fit.......

    Sent from my SM-G950F using Just T4s

  10. #10
    Drew's Avatar Now you're learning (Copper)
    Join Date
    Jun 2017
    Posts
    77
    Thanks
    35
    Thanked 10 Times in 9 Posts
    Felted them

    Sent from my SM-G950F using Just T4s

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •