Announcement

Collapse
No announcement yet.

New t4 owner.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by Snowrider View Post
    If I remember rightly, there are four indentations on the corrugated floor. You could start off with a small drill bit as a pilot and make sure all four holes go through the chassis rails (that’s what I call them. See pics above)

    Then you’ll need to drill bigger holes to take the mushroom bolts, and then you’ll need the load spread plates (think that’s what they’re called) they have a nut attached that the bolt screw into you need four of each.

    The plate that goes into the rails under the van ⬇️

    [ATTACH]13379[/ATTACH]

    The mushroom bolt ⬇️

    [ATTACH]13380[/ATTACH]

    All available on eBay, or try a firm Cali campers.


    Sent from The Alpine Express using Just T4s
    Thanks for that mate 👍 much appreciated I’ll have a look for some bits now!

    Comment


    • #17
      Yep, when you get a seat you can line it up on the floor and you'll see where they go.

      Comment


      • #18
        Welcome .

        Comment

        Working...
        X