If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Jack it up, put it on an axle stand, remove the wheel, slacken the handbrake adjustment right off and knock the drum off with a hammer. It'll have a seized brake cylinder or handbrake pivot and probably a lip formed on the drum which will want dressing with a sanding disc on the angle grinder.Oh, ahh be ya and a warm welcome from the shire. Pictures, we like pictures.
Thanks for the replies. Already done the big hammer trick! Think the adjuster inside the drum is siezed, the handbrake cables feel slack. Will try to get it backed off with a screwdriver and hammer tomorrow.
Comment