Heated seats wiring.

[Hans]

Do u got the original german instructions?

Sent from my SM-T810 using Just T4s

[S49]

Do u got the original german instructions?

Sent from my SM-T810 using Just T4s

Do you know someone that can read em mate?

[splitbusvanatic]

No. Only in English.

[splitbusvanatic]

No. Only in English.

[splitbusvanatic]

Ok. Kufatec sent me instructions in German.

[S49]

Hans will be able to translate as he is from Vdub land.

[Hans]

The mysteries grey cable get plugged in above the relays . They are different colours. Plug it in the gray side.

Sent from my SM-G930F using Just T4s

[splitbusvanatic]

Where does the other end of the grey cable go ?

[Hans]

The way i understood, straight to the battery minus.
But it isn't explained well

Sent from my SM-G930F using Just T4s

[splitbusvanatic]

Ok. Cool. Thanks Hans.. I might try that.

[splitbusvanatic]

I got them working....
Hans, You were right. Grey plugged in where you said and I wired it straight to earth post on battery.
I have not got switched live sorted out yet. Just temporary straight to positive post on battery. I will find a suitable fused switched live.

But they work. Which is great.

I did have to remove the extender cables under seat. That was totally part of my problem. Initially I thought I was looking at female to female plugs. But once I had a really good look under there. It does plug straight in after the short factory extender cables are ditched.

I’m so happy. Thank you for your help guys. Especially Hans. I just need to tidy up the wiring and route it properly. Another job in itself. Be nice to fill up a couple more blanks in dash.
Thanks again all. . - Dan.

[Hans]

Glad u got it sorted

Sent from my SM-G930F using Just T4s