Started making the front l shape
Sent from my iPhone using Just T4s
Announcement
Collapse
No announcement yet.
Lt build thread
Collapse
X
-
Little bit more done diesel heater installed.
Started on making the bed frames
Sent from my iPhone using Just T4s
- 1 like
Leave a comment:
-
Not a lot done today just cut up the pallets and thickness planned them down and routed them so there tongue and grooved
Sent from my iPhone using Just T4s
- 1 like
Leave a comment:
-
Originally posted by Jonnybigballs85 View PostLooking really smart Ricky. Looking forward to seeing what the finished article looks like
Sent from my iPhone using Just T4s
Leave a comment:
-
Looking really smart Ricky. Looking forward to seeing what the finished article looks like
Leave a comment:
-
No mate be usable by the end of next week
Sent from my iPhone using Just T4s
- 1 like
Leave a comment:
-
Finished the insolation, bubble foil and plyd the rh side
Sent from my iPhone using Just T4s
Leave a comment:
-
Did toy with the idea on the t4 as mine has the Eberspacker water engine preheater and was going to take it out of the engines cooling system and run that to two couplings
Sent from my iPhone using Just T4s
Leave a comment:
-
Originally posted by Ricky Gareth Rykala View Post
Yes mate I can lie sidewards across but I’m going 2 benches at the back with a drop down table and a l shape behind the drivers seat so you can walk from the sliding door straight out the back. But won’t have access to the back from the cab.
Sent from my iPhone using Just T4s
Sent from my iPhone using Just T4s
Leave a comment:
-
Little bit more done today. Finished the insulation on the LHs and plyd.. also replaced the ply floor
Sent from my iPhone using Just T4s
- 1 like
Leave a comment:
-
Originally posted by Activ8 View PostGot a link? Any dimensions?
I ask as I bought a stainless water cooled EGR, (something ;-) VAG HM), and trimmed the restrictive EGR fixings off to integrate into a smaller diameter valved bypass exhaust, plus it can be exited away from the van openings.
Sent from my SM-G988B using Just T4s
Sent from my iPhone using Just T4s
- 1 like
Leave a comment:
-
Got a link? Any dimensions?
I ask as I bought a stainless water cooled EGR, (something ;-) VAG HM), and trimmed the restrictive EGR fixings off to integrate into a smaller diameter valved bypass exhaust, plus it can be exited away from the van openings.
Sent from my SM-G988B using Just T4s
Leave a comment:
Leave a comment: