Announcement

Collapse
No announcement yet.

The Yellew Peril!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Originally posted by tommo1366 View Post
    Might also need to clean the rear driver side wheel..





    Sent from my iPhone using Just T4s
    Is it the image?.... or are you also going "swamper" too?

    Comment


    • Originally posted by Activ8 View Post
      Is it the image?.... or are you also going "swamper" too?
      No it’s still at standard AA height. Which is proving a good call with recent rains!


      Sent from my iPhone using Just T4s
      Slowly slowly catchy monkey!

      Comment


      • Time to start catching up with this site!! Had given it swerve recently as I just couldn’t get it to work properly. Wouldn’t load for ages, when it did I couldn’t post words and pictures and messages just off!

        Anyway. Not much gone on with the bus as we moved house and had all that rubbish that comes with it to contend with. Now have a garage though!!

        The bus was due a new clutch and a lower a few weeks back but had to cancel that as my work were going to slash my pay by 50% but have now seen fit to furlough us all which was a relief as keeping 2m apart on a building was impossible. So really the only thing that has gone on with it is a good clean inside and out and taught the boy how to refurb alloy wheels. He really hated it
        Slowly slowly catchy monkey!

        Comment





        • Sent from my iPhone using Just T4s
          Slowly slowly catchy monkey!

          Comment


          • Originally posted by tommo1366 View Post
            Time to start catching up with this site!! Had given it swerve recently as I just couldn’t get it to work properly. Wouldn’t load for ages, when it did I couldn’t post words and pictures and messages just off!

            Anyway. Not much gone on with the bus as we moved house and had all that rubbish that comes with it to contend with. Now have a garage though!!

            The bus was due a new clutch and a lower a few weeks back but had to cancel that as my work were going to slash my pay by 50% but have now seen fit to furlough us all which was a relief as keeping 2m apart on a building was impossible. So really the only thing that has gone on with it is a good clean inside and out and taught the boy how to refurb alloy wheels. He really hated it
            Glad you're all safe and well, and you're back posting mate.

            Comment


            • Originally posted by Activ8 View Post

              Glad you're all safe and well, and you're back posting mate.
              Cheers mate. Did you get my reply?


              Sent from my iPhone using Just T4s
              Slowly slowly catchy monkey!

              Comment


              • Originally posted by tommo1366 View Post

                Cheers mate. Did you get my reply?


                Sent from my iPhone using Just T4s
                Yep, all good Tommo. I'll pm shortly .

                Comment


                • Originally posted by Activ8 View Post

                  Yep, all good Tommo. I'll pm shortly .
                  No worries, just wasn’t sure it was working
                  Slowly slowly catchy monkey!

                  Comment


                  • Wheels look good tommo. What kind of primer did you use? I'm planning to refurb a set

                    Sent from my SM-G960F using Just T4s

                    Comment


                    • Originally posted by fife t4 new View Post
                      Wheels look good tommo. What kind of primer did you use? I'm planning to refurb a set

                      Sent from my SM-G960F using Just T4s
                      After a good rub down mate I used what I had left which was ( I believe, will check tomorrow) tetrosyl high build grey for metal.


                      Sent from my iPhone using Just T4s
                      Slowly slowly catchy monkey!

                      Comment


                      • So it's a high build primer I should go for

                        Sent from my SM-G960F using Just T4s

                        Comment


                        • You don’t have to, a normal etch primer will suffice but if you have any pitting or fine scratches then a high build will help reduce or eliminate those without the need to fill them. I rubbed the primer back with wire wool as I’m short on fine grade paper but it worked really well.


                          Sent from my iPhone using Just T4s
                          Slowly slowly catchy monkey!

                          Comment


                          • Perfect mate. Thank you

                            Sent from my SM-G960F using Just T4s

                            Comment


                            • Yellow strip added. Jury’s still out on this. White lettering next.


                              Sent from my iPhone using Just T4s
                              Slowly slowly catchy monkey!

                              Comment


                              • Yellow strip added. Jury’s still out on this. White lettering next.


                                Sent from my iPhone using Just T4s
                                Slowly slowly catchy monkey!

                                Comment

                                Working...
                                X