Announcement

Collapse
No announcement yet.

Day van build

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #76
    Got the rear seats fitted
    The floor put down and some ply up the sides....

    Sent from my SM-G950F using Just T4s
    IF ITS NOT BROKE DON'T FIX IT

    Comment


    • #77
      Then today I'm at this stage
      Everything out and re doing the floor with battons...and not using the full height ply on rear panels

      Sent from my SM-G950F using Just T4s
      IF ITS NOT BROKE DON'T FIX IT

      Comment


      • #78
        Got the floor back down....yesterday today I went about making some seating/storage and a trial fitting the table for the correct height....

        Sent from my SM-G950F using Just T4s
        IF ITS NOT BROKE DON'T FIX IT

        Comment


        • #79
          Another wee bit done over last few days
          Picked up some colorail fittings from b&q...£6 alot cheaper than bigger ones online with the scene tax added on to them...and had a rail I kept from an old ikea wardrobe...need to get another one £5 and add another leg to make it more stable....
          And done the 2 ends....had some polystyrene sheets to get nice snug finish against the side panels.....no gashley*gaps.will*be adding some 12v 240v to these ends so that gives me some time to decide whether I stain/vinyl or 4 way stretch carpet it....
          Hopefully get more done over next few weeks....will be making another bit up for middle when the material arrives.....kids could sleep there if need be....or myself if I ever get thrown out of the house....*[emoji106]




          Sent from my SM-G950F using Just T4s
          IF ITS NOT BROKE DON'T FIX IT

          Comment


          • #80
            Originally posted by MOPJOP T4 View Post
            Another wee bit done over last few days...

            Hopefully get more done over next few weeks....will be making another bit up for middle when the material arrives.....kids could sleep there if need be....or myself if I ever get thrown out of the house....*[emoji106]

            Like the end board shaping - matches the tailgate opening around the light clusters....

            Comment


            • #81
              Bit more done but not much
              Covered the ply with some 4 way stretch
              Next on the agenda is the 12v leisure battery setup....have loads of questions on this that I need advice on

              Sent from my SM-G950F using Just T4s
              IF ITS NOT BROKE DON'T FIX IT

              Comment


              • #82
                Theres a decent diagram on the tinters

                Here it is

                Sent from my SM-G960F using Just T4s

                Comment

                Working...
                X