Announcement

Collapse
No announcement yet.

Bit of a rant

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    So I've gotten my hose clips and covered the gaps in major with plastic sheet case of rain on electrics it's dark and I'm knackered hungry n cold.
    Have a whole day at it tomorrow tarpaulin if it rains . fingers crossed


    Sent from my CLT-L09 using Just T4s

    Comment


    • #17
      Check those little spill pipes between the injectors

      Comment


      • #18
        Originally posted by S49 View Post
        Check those little spill pipes between the injectors
        Will do s mate cheers.


        Sent from my CLT-L09 using Just T4s

        Comment


        • #19
          Originally posted by S49 View Post
          Check those little spill pipes between the injectors
          And the white plastic fitting for hairline cracks.

          Comment


          • #20
            Like a hurricane out there don't think a tarpaulin is going to cut it at the moment.
            See how the day pans out.
            Cheers guys

            Sent from my CLT-L09 using Just T4s

            Comment


            • #21
              Think I will stay in and wait see what tomorrow brings or it's next weekend.
              Rough out there.

              Sent from my CLT-L09 using Just T4s

              Comment


              • #22
                Originally posted by Vannewyyd View Post
                Think I will stay in and wait see what tomorrow brings or it's next weekend.
                Rough out there.

                Sent from my CLT-L09 using Just T4s
                You must be a southener [emoji23]. I've been outside cutting wood to make a bed for my eldest.

                Sent from my HUAWEI VNS-L31 using Tapatalk

                Comment


                • #23
                  Originally posted by karma846 View Post
                  You must be a southener [emoji23]. I've been outside cutting wood to make a bed for my eldest.

                  Sent from my HUAWEI VNS-L31 using Tapatalk
                  Hope it wasn't an electric saw.
                  Nothing wrong with them there southerners lol
                  Anyways it was one look 100 meters up the road (see pic) that finally made me mind up ,drains held well so far .last year two foot of water through the garage.
                  Mad up here all day.

                  Sent from my CLT-L09 using Just T4s

                  Comment


                  • #24
                    No it was all with a handsaw (bahco fine tooth). It was raining so power tools firmly packed away, didn't fancy a darwin award.

                    Sent from my HUAWEI VNS-L31 using Tapatalk

                    Comment


                    • #25
                      Originally posted by karma846 View Post
                      No it was all with a handsaw (bahco fine tooth). It was raining so power tools firmly packed away, didn't fancy a darwin award.

                      Sent from my HUAWEI VNS-L31 using Tapatalk
                      Could have knocked us up a raft.

                      Sent from my CLT-L09 using Just T4s

                      Comment


                      • #26
                        Originally posted by Vannewyyd View Post
                        Could have knocked us up a raft.

                        Sent from my CLT-L09 using Just T4s
                        [emoji23][emoji23][emoji23][emoji23]

                        Sent from my HUAWEI VNS-L31 using Tapatalk

                        Comment


                        • #27
                          Good news major is now a runner again, thanks guys for the helpful information.
                          I couldn't find a leek anywhere spill pipes injectors etc.
                          I bought New hoseclips and decided to receive tighten and check everything I could even the white filter plug on top looking good,I whipped fuel filter out which was tighter than a nuns.
                          On coming out it has a scratch and v small hole.
                          Caused by a little burr or bend or rust lump in the holder.
                          Anyways don't know wether it scratched going in last time and was holding till Disturbed doing welding or if it happened getting it out this time.
                          Anyways smoothed off with file and coated with dinitrol.
                          Put New filter in and bingo started first time rough for a couple of seconds then fine.
                          No bubbles in line.
                          Left running for a bit all seems good.(fingers crossed it's just that)
                          So I got front off may aswell do any little rusty bits and dinitrol it next weekend then put back together again and mot.
                          Cheers guys.

                          Sent from my CLT-L09 using Just T4s

                          Comment


                          • #28
                            Well done.

                            Comment


                            • #29
                              Mot tomorrow fingers crossed.

                              Comment


                              • #30
                                If its going in to the same test station you'd expect it to pass this time.

                                Comment

                                Working...
                                X