Van Anon.

[bassforce86]

Not so much an update as an achievement milestone!

Sent from my Pixel 2 using Just T4s

[rjhoy02]

Sent from my vernee_M5 using Tapatalk

[Fruitbat]

Not so much an update as an achievement milestone!

Sent from my Pixel 2 using Just T4s

Ooooohhhh a full tank , I’ve never seen that before on mine

[bassforce86]

Ooooohhhh a full tank , I’ve never seen that before on mine

A full tank of premium derv is just over £100 at the moment

Sent from my Pixel 2 using Just T4s

[regcheeseman]

Ooooohhhh a full tank , I’ve never seen that before on mine

MIne either - it runs out of the holes in the tank before it's full.

At least I have a spare tank from my scrapper to use.......or I would have if the scrapyard monkeys hadn't chopped through the tank with a disc cutter....... if only I had said quite specifically "don't cut through the fuel tank because I need that", oh no wait......twats.

[arfur fox-acre]

Hahahahaha. Bed it was that strange Snake chap.

[bassforce86]

Mother fudglings. (Presumably passes the profanity rules?)

Another minor update this evening!

Had a quick nose at the heater matrix because the temp dial does sweet fa, And to my surprise (heavily loaded sarcasm) the little ball has indeed snapped off the control arm.

This being a strange alloy, I'm pondering whether it's even strong enough to drill out and thread to hold a bolt in (to replace the feeble nipple)

Anyone drilled one out before? Or is it probably just worth hunting fleabay and the like for a replacement?

Sent from my Pixel 2 using Just T4s

[S49]

Have a word with Bigred he repaired his by bonding some sort of fishing ball on the end which broke. Looked a quality and lasting repair.

[regcheeseman]

Mother fudglings. (Presumably passes the profanity rules?)

Another minor update this evening!

Had a quick nose at the heater matrix because the temp dial does sweet fa, And to my surprise (heavily loaded sarcasm) the little ball has indeed snapped off the control arm.

This being a strange alloy, I'm pondering whether it's even strong enough to drill out and thread to hold a bolt in (to replace the feeble nipple)

Anyone drilled one out before? Or is it probably just worth hunting fleabay and the like for a replacement?

Sent from my Pixel 2 using Just T4s

Ha!

You want to know what the most asked for item is on the T4 I'm breaking is? Now do you want to guess what part on the T4 I'm not selling is?

[bassforce86]

I'm not even remotely surprised Reg! haha

I did see some guy selling reinforced brass replica's for around £30 on the bay. But couldn't even begin to justify £30 for it... not until I've exhausted other options.