Announcement

Collapse
No announcement yet.

Temp gauge not working :-(

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Temp gauge not working :-(

    My T4 2.4D has a non functioning temp gauge.

    I'm sure I saw a thread about this on here but couldn't find it again so sorry for asking again!

    Can you please advise where I should be looking to try and find a solution?

    Please bear in mind I am a to mechanics what Trump is to diplomacy

    Thanks in advance.

  • #2
    First place to check is the sensors in the plastic housing on the cylinder head, also the wires to them, does it not work at all or is your engine running cold? (thermostat) If all this checks out could be dry joint in dash. Not sure of the multimetre readings you should get thro the sensors but they are cheap enough, i'd start by checking the conections to them first.

    Comment


    • #3
      Originally posted by S49 View Post
      First place to check is the sensors in the plastic housing on the cylinder head, also the wires to them, does it not work at all or is your engine running cold? (thermostat) If all this checks out could be dry joint in dash. Not sure of the multimetre readings you should get thro the sensors but they are cheap enough, i'd start by checking the conections to them first.
      Thanks for the reply.

      It doesn't appear to be working at all. I seem to be a jinx on temp gauges. My last two vehicles have also had similar issues :-(

      Will get out there this morning and see if I can find the sensor.

      Thanks again

      Comment

      Working...
      X