Announcement
Collapse
No announcement yet.
my van build pics
Collapse
X
-
Comment
-
once I had put the insulation everywhere I could fit my hands inside doors, lined all the roof and every panel possible I put all the ply panels back in place
I then had to buy a bed I went for a reimo variotech that I managed to find second hand
we went for this as we wanted to be able to slide it back and forth the length of the van so next up was to install the rails
Comment
-
these had to be dead parallel running length of the van other wise the bed would not slide smoothly I used the fitting kit that came with the rails and glued using sikaflex
once rails were in I could start doing the flooring I had to bring the ply up to level with the rails this was 24mm so I used 12mm ply to baten out floor first then scribed in my ply floor
I glued this down using stixall the really does stick all
Comment
-
I think the rails were 200 then I paid 400 for the bed. the bed is very comfortable to sleep on only down side is that because my t4 was panel van the rear seat belt mounts are not sufficiently reinforced so can only have the kids in the seat in the forward position
Sent from my D2303 using Just T4s
Comment
Comment